Friday, December 31, 2010

Aromatic Heat Pack with Belt Tutorial


As you might already know, I am a big fan of heat packs. Just the other day, I made this heat pack for myself rather hastily (as my back was already nagging at me ^^). I still haven't found the cherry pits but my Princess asked for her own heat pack. 

After having used my own heat pack for a few days now, I have concluded that a wide belt would hold "better" the pack rather than the thin sash/tie.

So, this morning I made this heat pack with belt for my daughter.


I also followed the fantastic suggestions made by so many lovely people in the blogosphere - so I added lavender essence for my daughter's heat pack.

I just used scrap fabrics for this heat pack. I used the same measurement for the fabrics except for the belt. You would need to measure your child's waist, subtract from it the measurement of your pillow then divide into 2 plus 1 inch allowance. My daughter's waist measures 22", so each belt piece (you would need 4 of it) was 7" long. She wanted a CUTE heat pack so I took a long strip of scrap fabric to make a ruffled band later.


So, make first the bag or pillow which would hold the rice. Do not forget to make a zigzag stitch after the straight stitch. And the backtrack stitches! ^^)


I just left a 2" opening so I could turn the pillow inside-out and pour the rice inside the pillow with the help of a wide-mouthed funnel. I then closed it and topstitched.



Now, this step is optional. You could (or not) add some iron-on interfacing to your belt pieces. 


Align your belt pieces (2), right sides together, sew a straight stitch except the short side where you would turn your belt piece later.


Before turning your belt piece, clip the rounded part of your piece so you would have a crisp rounded belt.


Topstitch including the short side where you turned your piece inside out. You should sew a straight stitch so you would be sure to catch all layers later when you attach your belt to the pillowcase.


I then took the long strip of fabric, aligned then wrong sides together and sewed a straight stitch, left an opening so I could turn my piece then closed the opening. 


I then sewed a long straight stitch (that would be 5.0), gathered the fabric by pulling the bobbin thread to create the ruffles and attached the ruffled band to one of the pillowcase piece. I also added a pink lace I found in my stash. And added a pink bow and two small pearl beads for a cuter look ^^) Sew a basting stitch so you would be sure to catch all layers later.

Now, hem your pillowcase pieces.


Attach one of the belt piece on one side of your pillowcase. Do not forget to reinforce with a zigzag stitch or better yet, serge! After you've attached one belt piece, it would look like this.


To be sure that your belt pieces are safe from your needle ^^) pin it towards the opening of the pillowcase.


You'll have this pretty pillowcase with belt.


Now, sew your velcro on the pillowcase...


and the belt...


And... tada!!! An aromatic heat pack with a pretty pillowcase with belt!


Now, call your Princess so she could try it on.



She liked the heat pack SOOO much she didn't take it off the whole afternoon and she would also use it for bedtime tonight(accdg. to her ^^)so she must really love it so much! She's so comfy and warm. ^^)

Now, I'm off to make something for my Li'l Guy ^^)

P.S. My SIL visited us today and saw this pretty heat pack and asked if she can have one! Of course, I said yes! ^^)




UPDATE: Check the different versions here. They were longer (adult size) and filled with different grains.



P.S. Don't forget to vote for us at The Picket Fence. Just click the button below to vote. Thanks!









Hugs,




I am linking to these parties!






As Seen On:


All Free Sewing


Homemade Gift Ideas
Pin It!

Thursday, December 30, 2010

THURSDAY GIVEAWAY #3 WINNER

Our 3rd Giveaway has come to an end and we have to draw the lucky winner of the cute owl plushie. And the randomly drawn number is:

Our lucky winner is Beth of Sand to Pearl, who said:


I'm already a follower. Oh, and the owl is super super cute!


Congratulations Beth! And to everybody, thanks for joining! We'll have another giveaway coming up! Stay tuned! ^^)



Hugs,




Pin It!

Back Relief Heat Pack with Pillow Case Tutorial


Hi, everyone! I would want to share with you a tutorial for a Back Relief Heat Bag. Who doesn't love this little wonders? I used to have a cherry pit microwavable pack. I have a bad back so I used it almost every  night, especially when I was pregnant with my Li'l Guy... you know, excruciating sciatica pain :(

About a year ago, my beloved heat pack has finally "retired" ^^). One problem I had with my old (store-bought) heat bag was that if I was asleep and would wake up in the middle of the night, the pack is no longer on my back! If I'd want for it to stay on my back then I either had to sleep on my back (so difficult especially if you have an ENORMOUS preggy belly ^^) or sleep on your side. I also love using it during the day but you'd either have to lie down or stay seated while using it or not use it at all. 

I have tried looking for a heat pack which would suit my needs: one which would stay in place! I have scouted online and off line but found none. Today, I had a very BAD back pain and I still haven't found the "ideal" heat pack. So, I have decided to create my own. I would want for it to stay in place when I am asleep. I would also want to be able to "wear" it even if I am cooking or doing other household chores. But it should also be "versatile" - something everybody could use no matter what size (hubby, kids or I) and purpose (back, neck, etc.) I wanted to use cherry pits for its heat-retention (and so as not to waste any form of food source) but I had none on-hand  (plus my back was really aching SO SO much I couldn't wait) so, I settled for rice just for this bag.

I took this old piece of white curtain to make a bag where I could place the rice and some scrap fabric for the pretty pillow. 

I also took some velcro so the rice bag would stay inside the pillow. So, I had:
(2 pcs.) 9.5" x 5.5" for the bag (white fabric)
(2 pcs.) 10" x 6" for the pillow
(2 pcs.) 26" x 1" for the sash
velcro - 4" long
*1/4 seam unless stated otherwise

Take the white fabric, place it right sides together and sew a straight stitch then a zigzag or overlock on all of the three sides (1 short and 2 long sides). Leave one side open.


Place the rice inside. I used more or less 150 grams of rice.

Then sew it close. I even topstitched all sides (not shown) to ensure that the bag won't get ripped open and the rice won't get spilled. ^^) 


Now, take the pieces for the sash. If you are not in a hurry you could do it the right way (I am saying "the right way" here since it would  yield a neater look) by folding the piece in half (lengthwise), right sides together, sew a straight stitch on its whole length, flip it over then do a topstitch. I would have done this. But I was in a hurry to have my heat bag (my back was screaming for it ^^)


So, what I did was fold the piece in half, lengthwise, wrong sides together as shown below and folded inwards the short side of the band. You can pin it or run your nails through the folds. 



Place the band under the presser foot (the longer side) and sew happily ^^) a straight stich, feeding while keeping the edge inwards, making sure to catch everything. 


When you reach the short side of the band, it's now easier to sew it since you have left the pin or ran your nails through it. 


So, I had this. I did the same for the other band. You could leave the other end of the band unsewn since you will have to attach it to the pillow later.



Now, get the pieces for the pillow and sew a hem on one (longer) side of each piece. You could pin or iron before sewing. This time, I just eyeballed it.

Now, place the two pillow pieces right sides together and pin the sashes/bands on each side as shown below (near the hem). Pin the unsewn ends of the bands.
don't get confused as this picture was taken before I hemmed the pillow ^^)

Sew a straight stitch then a zigzag or serge on all sides. Make sure that your sashes are out of the way so they won't get caught and sewn in.

Turn your pillow and sew the velcro on.


20 minutes later (picture taking included), I had this.

I told you I was in a hurry to finish it! My back was nagging at me ^^)

I then popped the bag in the microwave, placed it inside the pillow, tied the sash around my waist and went on to write this post. It took me longer to write this post than to make the heat bag ^^). My back is now all warm and I am more comfy and warm ^^)

My kids are asking me for their own heat bags. I promised to make one for each as soon as I could get my hands on some cherry pits! I might also make lined or even reversible pillows for their heat bags! ^^)

I hope you could use this tutorial one of these days. This heat bag has really helped relieve my back pain.

This bag could also be used cold. Just put it inside a ziplock, pop it in the fridge and use it on bruises or stings. I am surely making more of these! I'd make one or two especially as cold packs and make two heat bags for my kids. 

UPDATE: Check the spruced-up version here and the variations here.

Hugs,








As seen on CraftGossip.com








I am linking to these parties!



Pin It!

ShareThis

Related Posts Plugin for WordPress, Blogger...
 
Pin It button on image hover